Electrician: Power Up the Workshop
MathModelGrade 6, 7, 8Work as an electrician in a small workshop. Flip breakers, plug a lamp, a drill, a saw and a heater into outlets on different circuits, and read a clamp meter, a multimeter and the panel's load meter. Use I = P ÷ V to keep every circuit under its breaker's rating, then lock out and tag out the panel before you fit the breaker for a new heater circuit.
What students learn
- Use the unit rate I = P ÷ V (watts per volt) to find the current each tool draws at 120 V, and add the currents on a circuit.
- Compare a circuit's current with its breaker's rating, rearrange loads so nothing trips, and choose a breaker for a heater that runs at no more than 80 % of its rating.
- Follow an electrician's safe practice: safety glasses and insulated gloves, never touching live parts, and locking out, tagging out and testing for voltage before working on a circuit.
Standards
Misconceptions it spots
When you assign it, your report groups students by these.
- Thinks a bigger breaker is always safer, not knowing the breaker protects the wire.
- Divides volts by watts instead of watts by volts.
- Sizes a breaker to the exact load, with no headroom for a load that runs for hours.
- Locks out but does not test for voltage before touching.
- Thinks switching a breaker off is enough, without locking and tagging it out.
- Finds one tool's current and forgets that currents on a circuit add up.
- Thinks a circuit can power anything plugged into its outlets, whatever the total current.
- Skips safety glasses and insulated gloves for panel work.
- Treats watts as amps, instead of dividing power by voltage.
- Is willing to work on a circuit that still has power.
Progress
- Item 1: not answered
- Item 2: not answered
- Item 3: not answered
- Item 4: not answered